Outdoor Estimations and Bird Feather Investigations

Deep snow kept us from spending a lot of time outside.  We did check out the frozen pond in the Eastman Conservation Area behind Newman School.  While we stood on the dock, we could see the hill at the Needham RTS through the woods across the pond.  The sun was not far above the hill.  We learned a way to estimate the time until the sun is hidden by a distant hill or treeline or an ocean horizon.  Here's how:

• Do not look directly at the sun!  You can see it without looking right at it.
• Hold an arm straight out in front of you and bend your wrist so that your palm is facing you and your fingers are pointing to the side (parallel to the ground). 
• Close your fingers against each other and either bend your thumb into your palm or bend it up to the sky. (You don't need your thumb for this estimation, so you are getting your thumb out of the way.)
• Position your hand so that your top finger (index finger) appears to "touch" the bottom of the sun.
• Count how many fingers there are between the bottom of the sun and the hill (or treeline, or horizon).
• If you need more fingers, hold out your other arm as well and stack your hands, with the index finger of the new arm touching the pinky of the first arm.  Add up all of the fingers that lie between the sun and the hill (or treeline, etc.)
• Each finger represents 15 min.  Multiple the number of fingers by 15 to find the total number of minutes until the sun is no longer visible.  

We found that the sun would "set" behind the hill in 90 min from the time that we stood on the dock.

As we headed back to the school, we faced a large tree behind the school and learned a way to estimate its height.  Before we had come outside, we measured the height of two students in our class.  Here's how we estimated the tree's height:

• One of our measured students stood at the base of the tree, while the rest of us stood farther away (maybe a hundred feet or so; no specific distance is required).
• We held a pencil (positioned vertically) at arm's length, with the student in the distance right "behind" the pencil.
• We positioned the pencil so that the top of the pencil's eraser was at the top of the distant student's head, and we shifted our fist on the pencil so that the distant student's body was covered by the part of the pencil above the fist (still having the eraser end "touching" the top of the student's head.)
• We used this part of the pencil (above the fist) as a unit of measure and moved our arm with this unit "up" the tree in the distance until we reached the top.  
• Then we multiplied the number of pencil units we used by the student's height.  Then we did this again with the other student we had measured inside to double-check the estimated tree height.

Both of our measurements came very close to 40 feet.  (One of us did this calculation in the snow with a stick!)

Back inside, we warmed up with hot chocolate as usual and then did a feather "lab."  Here's what we did:

• Our instructor passed out "flight feathers."  These were turkey wing feathers from a craft store.  She also passed out "down feathers" which were goose feathers, also from a craft store.  Our tools were hand lenses, microscopes, toothpicks and toothbrushes.
• We learned the parts of a feather:  shaft and vanes (made up of barbs and barbules).  
• We passed our fingers under the ends of the shafts and saw that we could see dimly through the shaft because it is hollow - great for not adding much weight to a bird. 
• We examined the asymmetry of the feather (one side of the vane narrower than the other), and the curve of the feather (from one side of the vane to the other).  We learned that the feather is an airfoil like an airplane's wing.  Our instructor turned on a hairdryer and aimed the "wind" at our feathers as we held them horizontally with the end of the shaft held loosely in our fist (narrower vane closer to the hairdryer).  We could see and feel how the feather would lift because of the air flowing faster over the airfoil and slower underneath.  When we turned the feathers over and again turned the "wind" on them, they would immediately flip over.  
• Then we held our flight feathers close to our ears, and while we were silent, we listened as we pulled apart barbs of the vane.  We could hear them "unzipping!"  Under the hand lenses and microscopes, we did this again and saw that the barbs are small, individual parts of the feather's vane.  Each barb has "hooks" called barbules (we could see them!) that hook it to the neighboring barbs. The "unzipping" sound we heard was the hooks pulling apart. When barbs are neatly hooked together, this helps the feather to be a smooth,solid unit which helps with flying.  
• We used toothbrushes to "preen" the feathers so that the barbs would again be interlocked.  We learned that birds use their beaks to preen their feathers, sort of the way we did with toothbrushes.  They also apply oil from a gland found near their tail.  
• We examined the soft, downy feathers and found that they did not have barbules to hook the barbs together.  that's why they are soft and downy.  We learned that these feathers are for insulation, to keep birds warm, so interlocked barbs are not needed; down feathers aren't needed for flight.
• We learned that hummingbirds may have only 1000 feathers, while swans may have 25,000!
• We dropped a few drops of water on the flight and down feathers and pressed the drops down.  The flight feathers did not absorb the water; it beaded right up.  The down feathers did absorb the water.  
• We learned that it is illegal to collect wild bird feathers that we may find outside.  An exception may be made for feathers from game birds that have a hunting season.  We were able to examine wild turkey (game bird) feathers.  Looking at pictures of turkeys in flight, we were able to identify the parts of the bird where the feathers came from. 

Evergreens in Winter

This class took place the day before a blizzard was expected, so we had deep snow on our minds as we searched for evergreen trees and thought about their importance to wildlife in winter.  First, they provide food.  For instance, deer eat the twigs and needles as high as they can reach.  We found raggedly nipped off small branches on the evergreens along our walk.  Rabbits also eat the greenery that is low to the ground.  We were surprised to learn that porcupines can spend a couple of weeks in a single hemlock tree feeding on the bark and twigs.  Also, the seeds found in cones (or dropped by them), including the blue berry-like cones of red cedars, are a good source of food for red squirrels (and flying squirrels?), chipmunks and numerous birds such as chickadees and nuthatches.

Evergreens are also important in winter for the shelter that they provide.  Birds may roost among the branches, red squirrels may nest in them, deer-mice may re-use a bird's nest, and an evergreen grove is a favorite place for deer to have a winter "yard" where they rest away from high winds and deep snow.  The snow is not as deep under evergreens as it is out in the open or under deciduous trees such as oaks and maples.  Dense evergreens cut down on cold winds reaching animals sheltering inside. 

On our walk we found white pine, balsam fir, another kind of fir that we did not identify yet, and 3 kinds of cedar.  We smelled the balsam needles and crushed the scaly cedar needles for a very different smell.  We also found several deposits of deer scat, some rabbit scat and a fox or coyote scat.  One of the things that we encountered was a small wetland that was frozen over.  It was very solid and shallow (a few inches), so we have a lot of crazy fun sliding around, exploring, and playing on the ice.  On the way back to the school, we found ice in the crevices of some large rocks in front of the school.

Back inside, we examined samples of evergreens: white pine, 2 firs, 3 cedars and 1 hemlock.  We noticed that pine needles are longer and are grouped together, joined at one end where the needle packet is attached to the twig.  Hemlock and fir needles, on the other hand, are shorter and attached separately to the twigs.  Cedars have scale-like needles that fan out in pretty patterns.  We learned that fir needles are kind of soft compared to spruce needles.  We had to take our instructor's word on that because we did not find any spruce.  We saw that hemlock and balsam needles have white lines on the underside.  All evergreen needles have a kind of waxy coating that helps the trees conserve water in winter.  Winter is pretty much a drought time for trees because water is "locked up," frozen in the ground and in snow. 

We used small snipped up twigs, and packets of needles to decorate pencil containers.  Here is what you need:

• evergreen twigs and needles
• strip of paper (cut to size that can wrap around a can)
• cleaned soup (or other) cans
• laminator or clear contact paper
• scissors
• scotch tape 
• pencil or marker
• glue stick

We glued the twigs and needles on the paper and labeled them (balsam, hemlock, etc.).  Then we laminated the decorated paper, cut off the excess laminator plastic, wrapped the can and taped the paper's ends. Easy!